PYRADYM ™ TECHNICAL SPECIFICATIONS:

Controls:
SELECT: When in MANUAL mode pressing this button sequentially cycles through each of the 7 Chakra locations, selecting the tonal pitch and corresponding colour for each Chakra. The 8 th position is a MUTE position, silencing the sound and turning off the capstone lights. When in this position, the MUTE LED illuminates. When in TIMED mode, this button has no effect.

STEP TIMER : This section automatically controls the SELECT button, sequentially cycling through the 7 Chakra locations (plus mute) at a rate determined by the position of the rotary control setting, ranging from 1 to 8 minutes per step. START initiates the beginning of the set interval. The STEP TIMER has a free-running type clock function, meaning that it begins the preset time interval at whatever Chakra it is set at manually.

Tone Generation:
Pyradym ™ has 3 Audio Frequency Generators labeled as TONE 1, TONE 2, & TONE 3.

TONE 1 :

Select - OFF/SOFT/HARD:

OFF: disconnects the tone source from the output.

SOFT: selects a hollow sound reminiscent of an oboe or a bassoon.

HARD: selects a “raspier” sound reminiscent of a didgeridoo or throat singing.

TONE 2 :

Select - OFF/SOFT/HARD - same as TONE 1.

PITCH: CCW: pitch close to unison with TONE 1.

CW: varies the pitch to ~ 1 octave above TONE 1.

 

TONE 3 :

Select - SOFT/HARD: same as TONE 1 and TONE 2.

Select - CNTRL/AUDIO ROUTING:

AUDIO: TONE 3 is an audible tone just like TONE1 and TONE 2.

CNTRL: sends the tone waveshape to TONE 1 and TONE 2 thereby acting as an “invisible hand” causing both pitches to change. This feature is effective for creating pitch change effects not available with traditional sound therapy devices.

PITCH: CCW: varies the pitch to ~ 1 octave above TONE 1.

CW: varies the pitch to ~ 2 ½ octaves above TONE 1.

AMOUNT: Controls the volume of TONE 3 when ROUTING select switch is in the AUDIO setting, controls the level of pitch

change when ROUTING select switch is in the CNTRL setting.

Output Controls:

VOLUME: Controls the PYRADYM's generated sound level. This knob also controls the volume of any EXT. AUDIO OUT signals. The generated stereo sound output can be sent to an external amplification system by inserting a stereo plug into this jack.

( External Audio Output: Impedance 4.7K Ohms, 2.2v p-p External Audio Input: Impedance: 33k Ohms, Max Input Level: +6dB)

HEADPHONES: Separate stereo output sound and VOLUME control is available at this location.

Additional Information: (subject to change without notice)

Power Requirements:

• 100, 120, 200, or 230 AC Volts (factory programmable)
• Input Frequency: 50 – 60 Hz
• Max. Power Requirement: 160 VA
• Connexion: Molded 3-wire cordset, 10 ft. (non-removable)
• Protection: User accessible fuse

Physical:

• Dimensions: 18 x 18 x 13 (approx.) Weight: 22 pounds (net)
• Enclosure Construction: Solid White Oak or Select Cherry
• Available Options: The Model 1a is only available with a SOLID QUARTZ CRYSTAL CAPSTONE.
• Standard Finishes: Piano Black, Piano White, or Cherry (other finishes available by custom order, consult with factory)
• Warranty: Limited 2 Year Parts and Labour, excluding normal wear and tear and catastrophic events. Two free factory calibrations are included, (shipping not included).